setcrete logo

2K Pro

SETCRETE 2K PRO is designed for preparing sound internal subfloors prior to the installation of new floorcoverings and can be applied at thicknesses from 2-30mm. It is particularly suitable for direct application over old adhesive residues (such as bitumen and carpet tile tackifiers) and SETCRETE RAPID SET DPM, without the need for priming. Its fast setting characteristics enable a walk-on time of just 60 minutes and new floorcoverings can be installed from 4 hours.

SETCRETE 2K PRO is suitable for use over a wide range of other subfloor types including sand/cement screeds, concrete, granolithic, terrazzo, asphalt, steel, epoxy and polyurethane resins, ceramic and quarry tiles.

SETCRETE 2K PRO can also be used to level damp, clean, uneven concrete or sand/cement screeds prior to the application of SETCRETE RAPID SET DPM. As a guide for the use of products from the SETCRETE range, see Selector Chart overleaf.

Do I need to remove old adhseive residues before laying a levelling compound?For most floor levellers that is the case. However Setcrete 2K Pro is a specially designed compound for use over adhesive residues, saving time and effort. Setcrete 2K Pro can be applied directly over residues such as bitumen, carpet tile tackifiers, carpet adhesives and similar products, providing that any loose material has been removed. The mechanical removal of such residues can be costly and time consuming, but a product like Setcrete 2K Pro is the answer. It doesn't even need priming prior to application.